Depending on where you live, the time it may take for your exchanged product to reach you, may vary. Developed with installation speed in mind, each three part set can be fitted in less than a minute with no specialist tools required. Use this wall fixing kit to secure wall units, shelves, cabinets, radiators and more to plasterboard over blockwork walls in your home.

The best plasterboard fixing to use, if you have masonry behind the plasterboard and need to support a heavy weight, would be the Corefix fixing. The plugs have a flange around the entry hole to prevent the plug from disappearing into the drilled hole when you tap in the steel tube. Specially designed for dot and dab walls, Corefix wall fixings include a durable steel core that transfers the load directly to the solid wall behind, preventing the plasterboard from crushing under the weight of your fixture.

Corefix has been independently tested to a load of 100kg and has been in-house tested and proven to safely support over 200kg! fair enough and point taken, but a lot does depend on the quality of the plasterboard and the general construction of the build. From the wide range of Cobra wall fixings and hooks you can find the right fixing for any wall or application, from plasterboard to wood or concrete, heavy duty items to picture frames as well as many self-drilling fixings which only require a screwdriver to install. However, if you have no masonry behind the plasterboard, such as in timber stud walls, you'll need heavy duty plasterboard fixings that hook directly behind the plasterboard.

Each wall plug has enough depth to fill the gap between plasterboard and wall to transfer the load to the brick wall behind for a safe and secure hold.

Featuring a strong steel core, our reinforced wall anchors are designed to transfer the load to the brick or block wall behind the plasterboard, providing a safe and strong hold. The plugs, while cleverly designed, are made of a very cheap material and the screw will strip it if tightened with anything other than a hand screwdriver. The coated thick steel core tube bridges the gap between plasterboard and solid masonry wall meaning four fixtures can safely hold up to 100kg, ensuring any heavy item is securely held in place. All you need to install these fixings are a screwdriver, hammer, and drill, providing a no-fuss set-up.